home *** CD-ROM | disk | FTP | other *** search
Short: Faster than PFS also installed V2.4 Author: MartinTauchmann@bigfoot.com (Martin Tauchmann) Uploader: MartinTauchmann@bigfoot.com (Martin Tauchmann) Version: 2.4 Type: disk/cache Kurz: Nutzt den freien Speicher als Cache für FestPlatte, CD, FD et cetera Requires: OS 2.0+, 2MB FastMemory Date: 27.04.00 Replaces: disk/cache/fda.lha Url: http://MartinTauchmann.home.pages.de Version 2.4 of Future Drive Accelerator which is running out of date in middle of Oktober 2000, to give pirates no chance, New features figured out: * 'FDA' give you also more CPU-time, because it's just about 15 times faster, than the scsi.device (IDE-Controller). * 'FDA' is 5 times cheaper and 4 times faster than 'PFS' with 'FFS' and all well tested disk-repair/reorg-tools with full compatibility to all existing programs, it's faster to install, and updates are free. english documentation: o `fda_DviPS.lha` DVI (TeX) and PostScript (GhostScript) formarts, o `fda.lha` AmigaGuide and HTML formats. german documentation: o `fda_d_DviPS.lha` DVI (TeX) and PostScript (GhostScript) formarts, o `fda_d_GuidHTML.lha` AmigaGuide and HTML formats. `Future Drive Accelerator' V1.4 documentation and newer ******************************************************* Uses the `*free memory*' as a `*cache*' , the program reacts automatically on changes in memory resources, so that you will always get the maximum speed for your drives. Even "resources-hungry" programs will get enough memory. The concepts behind `Future Drive Accelerator' ********************************************** `Future Drive Accelerator' is a disk-cache program. A cache buffers all data which is written or read from the drive (hard disks, floppy disks, Compact-Disk, removable disk, ZIP...). If requested data is already in the cache, it doesn't need to be loaded from the slow disk. So far nothing new! Memory is, as we all know, always short. So you better think twice before you give it to programs. No matter how you set it up, you can never make it suitable for all programs. One program runs (thanks to the cache) faster than ever before, another one stops working (due to the lack of RAM). With all other cache programs, you had to adjust the memory usage. Of course, the more memory a cache can use, the faster it will work. So with old cache programs the memory usage had been set quite high, but because other programs stopped working this was stopped rather quickly. Now the cache is commonly set to an average size, so that all "memory-eating" programs run. Or you always had to change the cache-size manually to fit the current situation. But this is not a very satisfactory solution. And this is where `Future Drive Accelerator' comes in. `*The whole free memory*', whose size is changing all the time, `*is used as cache.*' With this technique, an `Amiga' with a 68030 50Mhz processor and 16 MByte FastMemory (Blizzard IV) averages a *factor 4* speed up. See Benchmarks. Write accesses are buffered, and later, while *writing back* to the drive, the head is moved from the highest to the lowest address. Another improvement is built-in for people who use exchangable media like disks, CDs, MagnetOptical-disks and ZIPs. When inserting the media again, the still filled cache is used. The media doesn't need to be accessed again. Who used a lot of dos-buffers? (1) for the file system, you can now even `save' this memory. Not to mention that you `*help protecting the environment*'. The motor and the electronics of the drive is used less and thus, energy is saved. => the *nuclear power plants* can be shutted down earlier. You should also keep in mind that the *hardware* wears out less. ---------- Footnotes ---------- (1) A dos-buffer requires (per default) a half KiloByte. What is required to use `Future Drive Accelerator'? *************************************************** `Future Drive Accelerator' needs at least: "AmigaOS" 2.0 or better. "2 Megabyte memory", more memory is recommended. Additionally, the following software is supported: "DiskSafe" (http://de.aminet.net/pub/aminet/disk/salv/DiskSafe.lha) After a reset or system crash, the cache will be written back before restarting the system. Example installation for `s:Startup-Sequence': DiskSafe DF1: DF0: HD0: Store: Font: HD2: HD3: HD4: ... REBOOT QUICKKEY WAITVERIFY VERIFYREQ LOGFILE=Store:T/DiskSafe.log IGNORE If this shouldn't work, try adding `RESETKEY'. "CopyMemQuicker" See Speed up. "FileSystems", "Devices" See Features. What speed improvements can be achieved with `Future Drive Accelerator'? ************************************************************************ * Copies 850KB in *35 seconds* from hard to floppy disk, this equals the speed of formatting. This is possible because, minimizes the overall seek time required to read or write data from or to disk. Outstanding I/O requests are ordered such that they can all be performed "*with one sweep*" of the disk head assembly, from the highest to the lowest disk address (Elevator seeking). * *23 MB/s* while reading, (SysInfo V3.23) instead of 7 MB/s without cache, with an Amiga and following equiment: Zorro III, CyberStorm MKIII, 060/PPC 604 150Mhz, UltraWide SCSI HD, 64 MB FastMemory, CopyMemQuick 40+. * The booting can get twice as fast if there are a lot of small files to load and many files reside in the `WBStartup' directory. * Faster access to directories from Workbench. * Amiga MC68030 50MHz, 16MB FastMemory. - IDE-HardDisk (tested with `DiskSpeed') (1) read *6.8 times* faster. write *8.1 times* faster. - DD-FloppyDisk (tested with `DiskSpeed') read *488.0 times* faster. write *997.6 times* faster. - Copying from one partition to another. 44 Dirs, 561 Files = 2.3MB Size c:Copy MUI: ASWAP:MUI ALL CLONE QUIET Dos 457 Dos-Buffers 46 secs 253999 micros FDA 7 Dos-Buffers 11 secs 196642 micros (*4.13 times faster*) * Amiga PPC604 233MHz MC68060 50MHz, 96MB FastMemory. - IDE-HardDisk (tested with `DiskSpeed') read *19.5 times* faster. write *20.4 times* faster. - SCSI-HardDisk (tested with `DiskSpeed') read *3.8 times* faster. write *3.5 times* faster. ---------- Footnotes ---------- (1) DiskSpeed Reference: 262144 byte, MEMF_FAST, LONG-aligned buffer. Compatibility, Features of `Future Drive Accelerator' ***************************************************** * Accelerates all kind of media e.g.*: Harddisk-, Floppy-, Compact-, ZIP, MagnetOptical- or SyQuest-drives, almost like a RamDrive. * Uses the `*free memory*' as `*cache*' , the program reacts automatically on changes in memory resources, so that you will always get the maximum speed for your drives. Even "resources-hungry" programs will get enough memory. * Minimizes the overall seek time required to read or write data from or to disk. Outstanding I/O requests are ordered such that they can all be performed "*with one sweep*" of the disk head assembly, from the highest to the lowest disk address (Elevator seeking). * Gentle, parallel reading and writing in Multitasking. * Smart-Power-Technologie: Minimizes the number of disk-accesses. * SmartCache: Read-ahead of blocks. * When disks are removed, the cache is only removed if necessary. When disks are re-inserted, the cache will be used again. * No fragmentation of memory. (Opposite to DynamiCache.) * Can possibly save memory, because dos-buffers are not required anymore. * Power-LED flashes when accessing cache. * Verify is as fast as in a copy-program, because data is verified in the background while writing. (the processor isn't used much while writing anyway). * If `DiskSafe' is installed, the cache will be written before a reset or system-crash restarts the computer. See Requirements. * Supports `DiskExpander' (http://de.aminet.net/pub/aminet/util/pack/epu14.lha), `Virtual-Memory-Manger (VMM)', `XFH' (http://de.aminet.net/pub/aminet/util/pack/XFH.lha) `temporal files' and `World-Wide-Web browsers'. * Supported devices: (probably all - scsi (http://www.amiga.de/files/index.html), 2nd.scsi, NewStyleDevice, atapi (http://de.aminet.net/pub/aminet/disk/misc/IDEfix97.lha), cybscsi, - trackdisk, floppy (http://de.aminet.net/pub/aminet/disk/misc/floppy43.lha), diskspare (http://de.aminet.net/pub/aminet/disk/misc/Diskspr3.lha), hackdisk (http://de.aminet.net/pub/aminet/disk/misc/NewHackdisk.lha), mfm.device ((C)CrossDOS), messydisk (http://de.aminet.net/pub/aminet/misc/emu/msh-156.lha), - fmsdisk (http://de.aminet.net/pub/aminet/disk/misc/fmsdisk.lha), - xpkdisk (http://de.aminet.net/pub/aminet/util/pack/xpkDisk37_8c.lha), - cd. * Supported FileSystems: (All knownn) - FastFileSystem(FFS), V44.5 (http://de.aminet.net/pub/aminet/disk/misc/ffstd64.lha) V43.20 (ftp://ftp.amiga.com/pub/) - ProfiFileSystem1+2(PFS) (http://de.aminet.net/pub/aminet/disk/misc/pfs95.lha), HomePage (http://www.greed.nl) - AmiFileSafe(AFS) (http://de.aminet.net/pub/aminet/biz/demo/afsdemo159.lha), - SmartFileSystem(SFS) (http://www.xs4all.nl/~hjohn/SFS/), - MessyFileSystem(MSD) (http://de.aminet.net/pub/aminet/misc/emu/msh-156.lha), - CrossDOSFileSystem(MSD) ((C)CrossDOS), - Berkeley (NetBSD LinUX) Fast FileSystem (BFFS UNI\02) (http://de.aminet.net/pub/aminet/misc/emu/bffs1.3.lha). and compatible, furthermore all MultiUser-"clones". * Supports FileSystems with a variable block-size. * Supports harddisks with a capacity of 4 GigaByte or more. * Protects partitions beyond the 4 GigaByte "barrier" from faulty accesses. * Is the fastest cache program. Accelerates harddisks by the *factor 2*-*20*, floppy disks by the *factor 2*-*997*. FAQ: * Please, enable "Protect tracks in memory with checksummes" in preferences, first time you run 'FDA', to figure out whether you have installed programs which change foreign memory blocks (cache). If so, you should remove the "bad" programs. When there is no further "FDA Checksumme-error" request, your system is clean and stable and you should disable "Protect tracks in memory with checksummes" to get maximum performance. Perhaps, the next version protect the cache with MMU for "relativ" safety; without slow down the performance. * It is *very recommend* to install 'StackAttack' (also for OS3.5) after SetPatch and before FDA in the 'S:Startup-Sequence', it make FDA and the whole Amiga more stable (fixes deadlocks, Guru $8000004 & $1000005) xyz/StackAttack ADDSTACK=512 ;Increase StackSize of every Programm * Install 'StackAttack' before 'PoolMem'. And 'PoolMem', with the argument "NoRamReverse", before 'FDA'. It's recommended to do not install PoolMem, because the Garbage-Collector task "PoolMem.supervisor", waste sometimes CPU-time. Q: I changed some files and after the reboot, the files are unmodified. A: Install DiskSafe. See manual-Requirements. Q: The internet-software crashes very often, and my new emails are not saved. A: I use "Async-delay" = 2 sec, for my partitions where i write while i'm online, it's good for 28k modems. When you have a faster, you should set it to 1 sec, to save the datas back to disk, while you are online. And not after a logout without Guru. If the datas aren't written back, because the write-traffic of your partition is to high (several writes while 1 sec); use "write sync". Q: Why FDA doesn't wait silently for mounting CD0: and then simply cache it? The same is for PC0:, if FDA is started BEFORE PC0: mounts itself from Devs/DosDrivers, FDA just complains that "Can't Find PC0:" and doesn't care if PC0: is started later... A: AmigaOS doesn't have a "simple" mount-notify function, but a hint: Insert in "S:Startup-Sequence" behind SetPatch, SaferPatches/PatchControl/SetMan/PatchLib's PatchSetFunc, StackAttack, PoolMem and FBlit<V3.64: RUN <>NIL: Sys:System/FDA ENVARC:FDA-Boot.prefs QUIET and at bottom of "S:User-Startup": Sys:Prefs/FDAPref ENVARC:FDA-AfterBoot.prefs USE and save as with FDAPref the two new prefs. Q: I have 16 partitions, how can i enable it quickly? A: It's not 'HyperCache', it was difficult enough to detect partitions. Use SHIFT-KEY & LEFT-MOUSE. If FDA, or FDAPref while FDA is running, hangs; i will send you a debug version to figure out which device is unsupported. Bugfixes are only possible with bugreports! History V2.4 14-Apr-2000 * Found the taskpriorities of ExpSys.device & buddha_atapi.device; for an faster access in 'n sweep. * Demo uses whole free memory to speedup. History V2.2 16-Feb-2000 * Fixed, the preferences calculate sometimes unreal values of 'Size of Track'. * Checksumme calculation faster. * Fixed, can't create the update-task for IDEfix ATA[PI] (CD-drive & ZIP-drive). * Fixed, unclean termination and preferences-use if 'PatchControl' is installed. * Fixed, trackdisk capacity-change detection. * Fixed, hanging of messydisk.device v1.56. * Perhaps fixed, hanging of cd.device 3.6 (05.03.97) Georg Campana; because untested. * Fixed, "Verify error" while writing ½ trax. * Fixed, "write async" timer restarted while receiving update-command according read-command. New USA office address: ShareIt! Inc Suite 1800 Chapel Hill Professional Center GREENSBURG PA 15601-8019 USA Phone: 724-853-6618 Fax : 724-850-8187 Of course our old address with the PO Box is still available and can be used to send us checks and other mail. In future, you are welcome to use our new address instead. History V2.0 17-Dec-1999 * Fixed, hanging of mfm.device (CrossDos) v40.9 and fd.device (XFileSystem v2.14 ) v42.86; because they use SendIO() without WaitIO(). This was also the case for the hanging bug of FDAPref. * Fixed, capacity-change detection for XFileSystem v2.17 * trackdisk.device OS 3.0 doesn't work with ½ trax and format-command, and doesn't reply a error value. The update-task uses now the write-command. FAQ addition: * Please, don't install QuietTD from DiskSpare, i don't know why it hangs. * Please, don't use fd.device v42.86 from XFileSystem v2.14 together with "verify", use instead mfm.device it works. XFileSystem v2.16 do something but not bugfree. Copyright addition: Registration move to new user is free of charge. History V1.8 09-Nov-1999 * Fixed, "write-Async" not 100% working timer. * Added, PFS against FDA+FFS benchmark. History V1.6 30-Sep-1999 * Recognize capacity-change of removeable-madias. I.e. DD<->HD Disks * English translation of documentation Thanks to The Amiga Translators Organization [http://ato.vapor.com] Jens Neubauer <jens.neubauer@gmx.de> for translate. Heiko Hayn <Smeagel@gmx.net> for proof-read. * ESC-Key supported Other products ************** Aminet:gfx/edit/FCP.lha (Convert Pic -> CopperList (6BitPlane -> 0 BitPlane CopperList) - CopperListEditor - CopperListSearcher - Full Modula-2 SourceCode) Aminet:mods/slow/BrainBird.lha (Shaman drums to meditate and 14 Ambient NewAge Songs) Aminet:comm/misc/TelekomBill.lha (German Phone-Bill calculater for WG´s) Aminet:gfx/show/ActiveWinPic.lha (Picture on any window, special SHELL!) Aminet:util/boot/IsInserted.lha (StartUp-Check if a Disk inserted then start BootUte) Aminet:misc/unix/File2Partition.lha (Spare memory if LinUX install, stores files direct to HD, Disks or any LogicalDevice) Aminet:dev/asm/ExecDis.lha (A commented disassembly of the exec library 1.2) http://computer.freepages.de/tauchmann/PasTeX-SuperHighRes.lha (5.1MB) (SuperHighRes & Epson medium pk-fonts, other resolutions possible) (=> Display 9PinPrinter `Quality` on Screen) Optimized Oberon 2 Ansi-C preCompiler (Translate Oberon-2 Source Code to optimized ANSI-C (GCC) sourcecode. =>Oberon for PowerPC m68k... prozessors, requires GNU/Linux/Unix/AmigaOS) (Oberon-2 is nearly identical to ADA 95, Amiga E, Cluster, Pascal and Modula.) Garbage Collector (Replaces C malloc and C++ new;C string (cord) package that provides for fast concatenation and substring operations on long strings;Required by Optimized Oberon 2 C preCompiler, Sather and Java.) extended ixemul.library (PPC version, Required by Optimized Oberon 2 C preCompiler, Java and many others.) http://home.pages.de/~MartinTauchmann/devel.html#Oberon ============================= Archive contents ============================= Original Packed Ratio Date Time Name -------- ------- ----- --------- -------- ------------- 2728 1053 61.4% 16-Feb-00 20:00:00 +FDA.info 2904 1491 48.6% 16-Feb-00 20:00:00 +FDAdoc.info 35476 17813 49.7% 27-Apr-00 17:43:02 +FDAPref 2635 1409 46.5% 16-Feb-00 20:00:00 +FDAPref.info 16328 8485 48.0% 27-Apr-00 17:43:22 +FDAView 2548 1296 49.1% 16-Feb-00 20:00:00 +FDAView.info 3511 1988 43.3% 15-Mar-99 18:40:02 +Install-FDA.deutsch.info 3470 1960 43.5% 15-Mar-99 18:40:02 +Install-FDA.english.info 42164 22023 47.7% 27-Apr-00 17:43:18 +FDA 23082 5827 74.7% 27-Apr-00 17:53:36 +Install_FDA 14604 8690 40.4% 06-Sep-95 22:58:00 +DoIconLite 4499 3485 22.5% 27-Apr-00 17:45:24 +fda.patch 3458 2696 22.0% 27-Apr-00 17:45:50 +fdaPref.patch 1430 1059 25.9% 27-Apr-00 17:46:10 +fdaView.patch 18480 11393 38.3% 18-Nov-98 16:45:24 +GPatch 1636 862 47.3% 25-Nov-99 19:53:08 +DSG.info 3216 1730 46.2% 10-Sep-99 21:32:58 +FDA-Benchmarks.guide.info 3210 1727 46.1% 25-Nov-99 19:53:08 +FDA-News.readme.info 3216 1729 46.2% 29-Sep-99 20:10:02 +FDA.guide.info 3476 2467 29.0% 29-Sep-99 20:18:58 +FDA_toc.html.info 3528 2407 31.7% 05-Aug-96 01:30:48 +AGuideConv 0 0 0.0% 06-Mar-00 21:29:12 +bgui.library.patch 3034 973 67.9% 15-Mar-99 18:40:02 +DSG.info 6413 1106 82.7% 15-Mar-99 18:40:02 +HD.PFS2.600DosBuffers 6848 1995 70.8% 27-Nov-99 20:06:42 +FDA-Benchmarks.guide 303 224 26.0% 15-Mar-99 18:40:02 +Benchmark-HDPFS2.BAT 6286 982 84.3% 15-Mar-99 18:40:02 +HD.PFS2.FDA 308 228 25.9% 15-Mar-99 18:40:02 +Benchmark-FDFFS.BAT 336 237 29.4% 15-Mar-99 18:40:02 +Benchmark-HDAFS.BAT 319 220 31.0% 15-Mar-99 18:40:02 +Benchmark-HDSFS.BAT 6181 994 83.9% 20-Aug-98 18:40:02 +HD.SFS.FDA 358 242 32.4% 15-Mar-99 18:40:02 +Benchmark-HDFFS.BAT 6361 963 84.8% 20-Aug-98 18:40:02 +HD.FDA 6324 933 85.2% 20-Aug-98 18:40:02 +HD.PowerCache 6344 950 85.0% 25-Mar-98 18:40:02 +FD.PowerCache 6464 1095 83.0% 25-Mar-98 18:40:02 +HD.423DosBuffers 6432 1063 83.4% 25-Mar-98 18:40:02 +HD.FastCache 6446 1068 83.4% 25-Mar-98 18:40:02 +HD.30DosBuffers 6450 1078 83.2% 25-Mar-98 18:40:02 +HD.3DosBuffers 6376 1029 83.8% 25-Mar-98 18:40:02 +HD.AFS 6438 915 85.7% 25-Mar-98 18:40:02 +FD.20DosBuffers 6393 985 84.5% 25-Mar-98 18:40:02 +FD.FDA 6364 1004 84.2% 25-Mar-98 18:40:02 +HD.AFS.PowerCache 138232 78575 43.1% 27-Feb-00 19:39:26 +bgui.library 18276 7285 60.1% 15-Mar-99 18:40:02 +DSG 9687 3699 61.8% 25-Mar-98 18:40:02 +DSG.guide 6463 1052 83.7% 20-Jul-98 18:40:02 +HD.AFS.FDA 6300 983 84.3% 20-Jul-98 18:40:02 +HD.SFS 6319 1018 83.8% 15-Mar-99 18:40:02 +HD.FFS.457DosBuffers 6360 1060 83.3% 15-Mar-99 18:40:02 +HD.FFS.FDA.Write-thru 2258 891 60.5% 25-Mar-98 18:40:02 +DSG1.readme 295 222 24.7% 15-Mar-99 18:40:02 +Benchmark-FDFFS.BAT 6346 892 85.9% 15-Mar-99 18:40:02 +FD.FFS.457DosBuffers 6297 957 84.8% 15-Mar-99 18:40:02 +HD.FFS.FDA.ASync 297 222 25.2% 15-Mar-99 18:40:02 +Benchmark-HDAFS.BAT 299 223 25.4% 15-Mar-99 18:40:02 +Benchmark-HDBFFS.BAT 6277 950 84.8% 15-Mar-99 18:40:02 +FD.FFS.FDA 6304 983 84.4% 15-Mar-99 18:40:02 +HD.AFS.FDA 6319 1000 84.1% 15-Mar-99 18:40:02 +HD.BFFS.457DosBuffers 6254 931 85.1% 15-Mar-99 18:40:02 +HD.BFFS.FDA 6342 1064 83.2% 15-Mar-99 18:40:02 +HD.AFS.300DosBuffers 6362 1074 83.1% 15-Mar-99 18:40:02 +HD.SFS.SFS-Cache10MBCopyBack 395 263 33.4% 15-Mar-99 18:40:02 +Benchmark-HDFFS.BAT 6308 977 84.5% 15-Mar-99 18:40:02 +HD.FFS.PowerCache 6394 1093 82.9% 15-Mar-99 18:40:02 +HD.SFS.SFS-Cache10MBNoCopyBack 303 230 24.0% 25-Nov-99 20:02:24 +Benchmark-HDAFS_FFS.BAT 379 255 32.7% 15-Mar-99 18:40:02 +Benchmark-HDSFS.BAT 6267 945 84.9% 15-Mar-99 18:40:02 +HD.SFS.FDA 6391 1082 83.0% 15-Mar-99 18:40:02 +HD.FFS.DynamiCache 6313 1034 83.6% 15-Mar-99 18:40:02 +HD.SFS.457DosBuffers 2549 2549 0.0% 15-Mar-99 18:40:02 +FDA-DeviceWindow.png 4042 4021 0.5% 14-Nov-99 16:21:54 +FDA-MainWindow.png 5674 2868 49.4% 27-Apr-00 17:55:08 +FDA-News.readme 122497 37698 69.2% 14-Nov-99 16:00:40 +FDA.guide 3466 1529 55.8% 14-Nov-99 15:36:42 +FDA_1.html 1957 902 53.9% 14-Nov-99 15:36:44 +FDA_10.html 9289 3463 62.7% 14-Nov-99 15:36:44 +FDA_11.html 1943 874 55.0% 14-Nov-99 15:36:44 +FDA_12.html 8865 3728 57.9% 14-Nov-99 15:36:46 +FDA_13.html 3479 1423 59.0% 14-Nov-99 15:36:46 +FDA_14.html 7156 3573 50.0% 14-Nov-99 15:36:46 +FDA_15.html 4405 1804 59.0% 14-Nov-99 15:36:46 +FDA_16.html 2387 1151 51.7% 14-Nov-99 15:36:46 +FDA_17.html 1873 886 52.6% 14-Nov-99 15:36:46 +FDA_18.html 10655 4069 61.8% 14-Nov-99 15:36:48 +FDA_19.html 1945 859 55.8% 14-Nov-99 15:36:42 +FDA_2.html 8539 3001 64.8% 14-Nov-99 15:36:48 +FDA_20.html 20123 4327 78.4% 14-Nov-99 15:36:48 +FDA_21.html 3182 1321 58.4% 14-Nov-99 15:36:42 +FDA_3.html 4809 2440 49.2% 14-Nov-99 15:36:42 +FDA_4.html 4878 1869 61.6% 14-Nov-99 15:36:42 +FDA_5.html 2415 1013 58.0% 14-Nov-99 15:36:42 +FDA_6.html 12559 4293 65.8% 14-Nov-99 15:36:44 +FDA_7.html 2904 1484 48.8% 15-Mar-99 18:40:02 FDA_Demo.info 5603 1818 67.5% 14-Nov-99 15:36:44 +FDA_8.html 5492 2305 58.0% 14-Nov-99 15:36:44 +FDA_9.html 3680 1618 56.0% 14-Nov-99 15:36:40 +FDA_foot.html 3557 1210 65.9% 14-Nov-99 15:36:40 +FDA_toc.html -------- ------- ----- --------- -------- 844337 326930 61.2% 27-Apr-100 22:31:08 98 files 
